awitty's latest activity
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Ok. Thanks for your help. I'll report back once I've done some further checks
-
Aawitty reacted to North Idaho Wolfman's post in the thread D950 one cylinder white smoke on start-up with
Like.
Oh it could be, but it could also be that it just hasn't fully seated the rings. You can have good compression and have a bad / Non... -
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Ok. Yes I took the manifold off so I could see what was going on. You don't think it's oil/valve stem seals then ?
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Not very long. Maybe a couple of hours. I did hone the cylinders
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Thanks Wolfman. I've not had the injectors properly tested, but I did try a new injector from a good source in the UK that didn't fix...
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Alas I couldn't possibly do that :-( My inquisitive mind won't let me rest until I understand what's going on. Bedside's I enjoy...
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.Well it's not the glow plug. It tested fine and cylinder 2 is still smoking after I swapped them around. Here's a little more...
-
Aawitty replied to the thread D950 one cylinder white smoke on start-up.When I had the injectors out I did check the glow plugs and they all quickly went red hot when I switched them on. But I haven't...
-
Aawitty posted the thread D950 one cylinder white smoke on start-up in Service, Repair & Maintenance.I did a part rebuild of my d950 (rings and rod bearings) and she smokes like hell and misfires from one cylinder (no 2) at start-up...