22R's latest activity
-
WD40 and a stiff-brush…then water-hose and/or low-pressure-wash. Re-grease to force any water out of pins/joints. (I buy WD40 by the... -
22R replied to the thread Kubota G1900 fuel filters.back under rea left fender. 22R
-
My biggest concern would have been the missing serial number.
-
22R replied to the thread "New" Mower. Tell me How I Got Cheated.Well you did get a great deal but you should as it was probably stolen. No idea of year? receipt, manual and da biggie.....removed...
-
22R reacted to Orangeglow's post in the thread Could My "New" Kubota L3902 Actually Be Used? with
Like.
OP, why didn,t you notice all that stuff before you bought it ? -
If the wheels are spinning and side-sliding on turns then the clutches should be okay. I agree with GeoHorn. It's likely 'just' a tire...
-
22R reacted to CD-G/BX's post in the thread G1900 3 point hitch seekers Public Service Announcement with Like.
Awesome!! Glad I could help… I pretty much did the same with my G. 3 pt hitch for moving trailer / pull a garden trailer I have used a...
-
22R reacted to kubotafreak's post in the thread Hydraulic lift cylinder rebuild without removable gland cap. with Like.
I have figured out how to disassemble the single acting cylinders without gland caps. If you remove the input line fitting you can align...
-
22R reacted to Hugo Habicht's post in the thread G1900 rear PTO G2591 operator manual, which oil? with Like.
The rear PTO is a small gearbox bolted behind the differential that is driven from the splined shaft behind the auxiliary pump in the...
-
22R replied to the thread G1900 rear PTO G2591 operator manual, which oil?.Cool, Thanks for the pics. So is that driven from the front PTO or the small splines out of the rear of the tractor?
-
22R replied to the thread G1900 rear PTO G2591 operator manual, which oil?.Can you post some pics of your rear PTO set up? Forgive me if you have already 22R
-
22R reacted to CD-G/BX's post in the thread G1900 3 point hitch seekers Public Service Announcement with Like.
I was doing some maintenance so tried to get some better pics of how I setup mine. I just welded a piece of metal to the original fuel...
-
22R reacted to CD-G/BX's post in the thread G1900 3 point hitch seekers Public Service Announcement with Like.
Had to make sure fittings and valve were spaced correctly so that nothing would rub against the plastic fuel tank or hoses wouldn’t rub...
-
22R replied to the thread G1900 3 point hitch seekers Public Service Announcement.I bought two new hoses and reused the original that went from the outlet to the deck cylinder. I just went straight out of the front of...
-
22R replied to the thread G1900 3 point hitch seekers Public Service Announcement.I used a piece of uni strut that fit right into the channel. I folded over the “top “ of the strut and tapped it and used the existing...
-
