Recent content by 150baker

Have a B7000. Temp today 15. Hard turning over, glow plug indicator light not visible. Hook upped battery charger showed sending aprox 4amps to battery which would indicate to me battery was charged. Hit glow bug switch and charge went up to aprox 8amps, glow plug indicator on dash went to a...

I have a B7000 Owners manual speaks to using a snow blower. Has anyone mounted one and if so pros and cons. Price?? Any pictures out there? Thanks Ron

That did the trick--as a footnote both nuts turned at the same time but fixed the problem.

fixed my 4wd problem--its called WD 40--there is a small steel marble hidden from site that drops in and out of a indent. Now on to my throttle creep. I have included a picture of the top of the motor where the throttle linkage attaches. The bolt/all thread goes into the top of the plate and...

I have tried all of the items you mentioned with regards to the 4wd but seems to make no difference. It goes out of 4wd hard--but goes back in easy. There is a linkage at the top of the motor with regards to the throttle linkage. The books and manuals I have do not speak to any adjustment...

Is there any one out there that has gone to that style of hub securement? It looks great but I would like to here others speak of it as to what there thoughts are. Thanks for you reply Ron

My B7000 has throttle creep. Is there a easy fix? Have tried dirt and spray adhesive at knob closest to drivers seat but problem still exist. Is there a internal friction ring mounted on the motor? Second item--cannot get tractor out of 4wd unless I reaaallyyyy pull hard on lever--don't want to...

Have a B7000, rear tires slide on shaft and have a pin with cotter key that goes through shaft to hold rim on. These rims also have two bolts each with springs and lock washer that tighten rim to shaft. Is there a specific torque and also if not what is there function? Thanks Ron

What brand is the hole driller?

The one shown when I follow link looks to large for my B7000. I assume that it will work. That bieng said do you have a B7000 and installed it on yours? I hate to order it and have to pay shippig to return.

I am looking to buy a post hole driller for my B7000. Do they exist? What is the averager price? I am in WA state. Am I farther ahead to buy a one man prtable? Any info helpfull.

My glow plug indicator in the dash is only visable at night. During the day if used I cannot see. Do I need a new indicator? If so is the B7001 a match?

Do I need to have a exact match when I add fluid after replacing the hose. Just had fluid changed this spring!

Great pictures and nice shop. Hope some day to have a shop with the floor that clean. I will not fill with oil at this time. It is confusing that they would provide a bolt to remove as the other three lube holes on the front. Is the u joint a sealed bearing that requires no mainteince?

It looks like a fill for fluid to protect the u joint inside, yet ops manual is silent.