Wanted Kubota L35 3point lift arms

[dma2869]

I'm looking for L35 3point lift arms and rods.
I looked all over the web and many tractor junk yards too.
Will the L39 set work? Someone once said they will but just wanted to confirm.
I've seen other post of people looking for these arms so I hope there is a set left for me tucked away in someones garage or barn..
I live in NJ

Thank You..Darren

 

[coachgeo]

I'm looking for L35 3point lift arms and rods.
I looked all over the web and many tractor junk yards too.
Will the L39 set work? Someone once said they will but just wanted to confirm.
I've seen other post of people looking for these arms so I hope there is a set left for me tucked away in someones garage or barn..
I live in NJ

Thank You..Darren

According to Kubota online parts listings these two tractors have different part #'s for the link arm. Does not mean it won't work though.

Anyone that has an L35; if willing, could measure all the dimensions then you could have a Welding Fab shop make you up a pair.

 

[65specialk]

According to Kubota online parts listings these two tractors have different part #'s for the link arm. Does not mean it won't work though.

Anyone that has an L35; if willing, could measure all the dimensions then you could have a Welding Fab shop make you up a pair.

I had a l35 and had the same problem when I wanted to use my chipper behind it. I was able to find a set that worked fine . Let me search my records and will give you the info. Dave

 

[dma2869]

There is a guy in my town who has a set but he won't part with them.
I asked him if I could borrow them to copy and he said maybe.
That was six months ago and he's being stubborn.
I'm still hopeful that there is a set laying around in someone's garage..

 

[coachgeo]

There is a guy in my town who has a set but he won't part with them.
I asked him if I could borrow them to copy and he said maybe.
That was six months ago and he's being stubborn.
I'm still hopeful that there is a set laying around in someone's garage..

Offer a deposit? Your second born child maybe?

 

[gdl4198]

It's get some pics and dimensions of mine for you if you can't find a set

Sent from my SAMSUNG-SGH-I257 using Tapatalk

 

[dma2869]

I spoke to the guy today who has the same tractor as me. He's going to give me some picts. Also spoke to my local welder and he can probably make a set for time and materials.The only problem with that is he charges like $100hr
If he takes all day doing it that's a big bill!! I guess I could find another welder fab shop but here on the east coast they all charge so much. This search for me is getting more and more a big pain in the ass...

 

[65specialk]

I bought a set for my l35 on e bay for less than $200. Can't find my receipt. Measure the length of a set and order same. Have been using every day for 3 years with no problems. Dave
http://www.ebay.com/itm/231159015655

I'm looking for L35 3point lift arms and rods.
I looked all over the web and many tractor junk yards too.
Will the L39 set work? Someone once said they will but just wanted to confirm.
I've seen other post of people looking for these arms so I hope there is a set left for me tucked away in someones garage or barn..
I live in NJ

Thank You..Darren

 

[dma2869]

The welder gave me a quote of $500-$600 to make the lower arms only!
I found the Kubota part number for them 32751-71310 and I looked around the web. They are available and cost $400 each arm and all the other parts add up to over $1000
Does anyone know of a good aftermarket company that makes good products?
I remember bending a cheap set that was china crap on my old tractor pulling a flail mower. It might have been my error but it seemed like they were junk!!

Thank you to everyone for getting back to me with idea's

 

[dma2869]

Still looking for these lift arms.

 

[dma2869]

Still looking for L35 Lift arms and center link

 

[dma2869]

Well it's almost a year and still no luck. My search continues!!