motionclone
Well-known member
Lifetime Member
Equipment
L345DT with Lp mower, forks and grapple thumb, Bobcat 337 Midi Ex
I want to add a grapple to my forks and thats going to require a way to power the cylinder on the grapple.
I have a L345dt with a great bend loader. The loader is powered by tractor hydraulics attached to the block under left side of the seat.
Where/ how to tap into tractor hydraulics and is it possible to use a NOS fisher plow valve to actuate the cylinder. I have a couple new never used valve bodies sitting on a shelf.
I have a L345dt with a great bend loader. The loader is powered by tractor hydraulics attached to the block under left side of the seat.
Where/ how to tap into tractor hydraulics and is it possible to use a NOS fisher plow valve to actuate the cylinder. I have a couple new never used valve bodies sitting on a shelf.