Round amber haz light disassembly?

[Sodark]

Sorry, I'm sure this has been addressed but I can't find mention of it. I'm replacing lamps with LED bulbs on a new B2650. The others were easy but I'm stuck with these rear amber, round lights. How do they come apart? I'm hesitant to pry, they seem apt to crack, and I don't see any screws or twist-locking function. I expect to feel stupid after it's explained but I'd rather that than feel stupid after breaking one without just asking. Appreciate any help!

 

[jryser]

On my L3560 they come apart along the edge - I found that out when I was cutting around trees and lost half. I was able to retrace my track, find the front, and snap em back together!!


Sent from my iPhone using Tapatalk

 

[North Idaho Wolfman]

Under the bottom edge is a weep hole opening use a pick and pull straight out to pop the lens off, works on either side.

 

[Sodark]

Ah, yet again, brute force (with a touch of finesse) is the solution to the problem. Thanks guys!

(For future reference for others, attaching photo of the separated unit, as I had hoped to find).

And now for the tail/brake light reversed polarity debacle... This shall require rum.

 

[johnjk]

Many of my issues wrenching are solved by a timely beverage.....