rocker arm cover torque specs B7100/D750A

[Dstar]

Does anyone know what the torque specs for the 3 nuts that holds the rocker arm cover on a B7100 with a D750A engine? I have searched and searched to no avail. Any help would be appreciated. Thank you.

 

[North Idaho Wolfman]

They are 15lbs

 

[Dstar]

Thank you very much. I appreciate the help.

 

[ant126]

I know this is an older post, but I was looking around at torque specs for B7100's and I could not find the specs for the 3 rocker cover nuts in the Kubota WSM either. HOWEVER someone in another forum has posted information they said was from their I and T manual and that manual gave 7-9 ft lbs for those 3 nuts.

If there is anyone out there who can clarify this feel free.

 

[Lil Foot]

Let me further confuse things- I have (3) manuals for the D750. Two list no torque for the rocker cover nuts, and the third says 5.1- 6.5 ft lbs.

 

[torch]

Page 2-6 of the B7100 HST WSM lists torque for various fasteners not otherwise specified based on bolt size and type.

 

[North Idaho Wolfman]

I know this is an older post, but I was looking around at torque specs for B7100's and I could not find the specs for the 3 rocker cover nuts in the Kubota WSM either. HOWEVER someone in another forum has posted information they said was from their I and T manual and that manual gave 7-9 ft lbs for those 3 nuts.

If there is anyone out there who can clarify this feel free.

I reread what I wrote earlier, that 15lbs is for the rocker hold down nuts not the rocker cover nuts.

The rocker cover nuts are 7lbs.

 

[ant126]

Thanks, great information! Mystery solved.