Pto

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,406
2,205
113
Bedford - VA
Still new at this tractor stuff.
Does it hurt to active the PTO if nothing is attached?
It does take a smidge of "power" to do so....not worth talking about ....

HOWEVER - if left uncovered.....can be very,very dangerous while spinning!


SO - why you asking?:D
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
28,882
5,265
113
Sandpoint, ID
Still new at this tractor stuff.
Does it hurt to active the PTO if nothing is attached?
To test it for working ability, nope no harm at all.
But like 85Hokie, just don't leave it on.

And FYI if you backside is not in the seat when you engage the PTO, the tractor will die, it's a safety.
On some models you have a couple seconds to flip the seat all the way up to override that feature, It's meant to be able to run the PTO for stationary work like running a wood chipper. ;)
 

Russell King

Well-known member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
4,710
1,012
113
Austin, Texas
And I believe you need to remove the cover before operating the pto or it may damage the cover.

Others should verify this is true.

My cover is a piece of capped pvc held on with grease


Sent from my iPad using Tapatalk
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
4,877
1,610
113
Mid, South, USA
Most of them have a rubber cover that slips over the shaft. The guys at work call them "condoms". It doesn't slip all the way to the seal, so turning the PTO on won't really hurt anything. Some of the BX's have a plastic cover and with those you can't see the shaft without removing the cover. It just pops on/off. Years ago when we sold Deere, had a guy buy a 990. Soon as he gets home he's out playing on it and kept trying to turn the PTO on to make sure it worked. Well on a 990 you can't see the shaft from the seat so he made a seat switch bypass, turned the pto on, walks around the back of the tractor and said "hmm....wonder if if't making any power"....grabs the shaft, squeezes and broke several bones in his arm/wrist/hand.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,072
4,430
113
40 miles south of Kansas City
Lugbolt, experiences like the man with the JD are what develops common sense. He didn't have a clue, now he does! Give him 30 years of experiences like that and we will all then say, "That guy has good common sense"! It just takes time.:D