Oil Strainer Torque Spec B7100 HST

[phaser]

Can anyone tell me what the torque specs should be for the Left and right hydraulic oil strainers?

I've checked the repair manual, and searched the forum but can't find anything.

Today I had to really struggle with a long breaker bar to get the left strainer loose.

The right side was easy to break loose with just a regular size ratchet.


Edit - have continued searching the net and the closest I could find so far was for a B7200, and that was 30-40 ft lbs.

.

 

[North Idaho Wolfman]

Being that they are O-ring sealed fittings, no real torque spec is going to be good in my opinion.
Just tighten them a reasonable amount, that is to say, bottom them and then use a standard 1/2" ratchet to snug them tight, no breaker bar needed.

 

[phaser]

That's seems reasonable. Thanks Wolfman

.