Fuel valve got turned off by brush while bush hogging, it appears, same as running out of fuel. Turned fuel shut off back on and bowl filled immediately. We didn't know about the bleeder valve on top of the pump until later when talking to a local dealer. After turning the fuel back on, a friend tried to loosen front line on the top of the pump and turned whole assembly slightly he says. I didn't see him do it but line has been twisted slightly also it appears. The local dealer said he was told to NEVER try to bleed there on the pump but too late for us .................. He said the thinks that is how the fuel flow is adjusted. If so, how do I adjust it" Tractor now running but limps/stumbles on acceleration and has reduced power. Idles at about 750 - 800 with noticeable exhaust noise.
Many thanks in advance
Many thanks in advance