Hey OTT, Need some hydraulic help on my L295DT. Just put a hyd pump on this ole girl after removing and cleaning the control valve and all of the hydraulic parts under the seat. Even replaced the piston and cylinder due to some rust. Changed all of the fluids and filter. I have a block on my relief valve used to pressurize the fel which I have a hose connected to the in and out ports since I have the fel off of the tractor for maintenance. After putting on the hyd pump, my lift arms do work now, but move slow and it sounds like it is putting a strain on the tractor when I try to lift the arms. I have a gauge connected to the port on the front and get no reading. Hope someone has had this same trouble and can shed some light on this. Other than paint and body work, a soon as this hyd issue is resolved, this old girl will be as good as new. Will send some pix when I get done