Kubota B7001 cogs

[rustydusty]

I need new cogs for kubota B7001 tractor on the front axle as completely worn so I need a spare part number if anyone can help please

 

[North Idaho Wolfman]

You're going to need to describe what part you need better.
Your B7001 does not have anything called a cog.

 

[Thunder Fish]

Cog = Gear,again there are a few so a better location/information would help please.

 

[rustydusty]

You're going to need to describe what part you need better.
Your B7001 does not have anything called a cog.

A friend was checking the front hub and when he took it off the gearing inside is all worn.i know nothing about tractors at all! Perhaps it's called a sprocket? He said as no oil was in the gearing Box the cogs had sheared off

 

[North Idaho Wolfman]

Sprockets are for chains.
You have gears with teeth.

Count the number of teeth on each gear.

 

[billrigsby]

This is for the B7000, I have no idea how close if at all it is to the B7001?

 

[North Idaho Wolfman]

First thing @rustydusty is to make sure you have a B7001, a lot of people think they have a B7001 when in fact they have a B7100.
Can you give me the complete serial number that is stamped on the clutch housing by your left foot.

 

[GreensvilleJay]

DR appears to be in Suffolk,so maybe in England 'somewhere' ? Pretty sure he's not in Ontario, Canada.
Cog is Limey for gear...