I think I have a problem..

[JohnnyFbomb]

Guys, when I find a deal, I can't stop myself from adding another project to the list. Found this project yesterday. 3PH 6' sickle bar mower.

LOL, my B7100 isn't even running yet and I keep adding projects.

 

[CaveCreekRay]

Looks like it needs a little WD-40!

 

[Tooljunkie]

Could always change your handle to implementjunkie.
I found a sickle mower,snowblower,made a trailer hitch and fork attatchment and just finished my power rake. Next build is box scraper.

 

[North Idaho Wolfman]

That looks like it could tip your B7100 on it's side.

 

[Corney]

I am on the other end of that problem and am currently finishing up rehab.

Sold my 51 Ford 8N, two trailers that needed "some" work, a 7' farm King 3 pth blade and am trying to get rid of a JD 440 snowmobile my nephew park that I have been mowing around for two years.

Got rid of 5 motorcycles that weren't running about 3 years ago.

Not fully recovered yet because I still have a old bota that marks its territory out the front hub, valve under the seat and FEL controls. Plus I still have 5 implements that need fixin.

 

[JohnnyFbomb]

Ok, guys. It happened again. Can you guys tell me who makes it and where can I find parts for it? LOL

 

[Tooljunkie]

There is an RS1200 made by yanmar.

 

[North Idaho Wolfman]

That is a Kubota tiller, You can tell by the Kubota Logo and the Japanese writing, but it's going to be very difficult to find parts for it.

 

[JohnnyFbomb]

That is a Kubota tiller, You can tell by the Kubota Logo and the Japanese writing, but it's going to be very difficult to find parts for it.

I really only need the front input seal. I'm sure I could measure the ID and OD and find one, but it would be kind of nice to just buy the piece.

BTW, Where is this logo?

 

[Lil Foot]

Lower left corner of the riveted nomemclature plate.

 

[JohnnyFbomb]

Lower left corner of the riveted nomemclature plate.

wow! Learn something new everyday.

 

[Tooljunkie]

If you could find parts manual, maybe it will give up a seal number that may still be valid.
Myself, i measure and order. Faster and usually cheaper.

 

[North Idaho Wolfman]

Yea, finding parts for grey market tractors and implements can tough.

 

[Rezzey]

Thanks for the pics! I have the same tiller and that diagram is like gold to me know how its meant to be adjusted correctly

Sent from my SM-G900I using Tapatalk