Homemade Lawn Striper results

[BillK01]

After lots of searching I finally decided on a lawn striper design I liked so I built it a couple weekends ago. Still working out the best way to get good results. Here are is the second try using it...

 

[pauly]

Looks good. My Smiplicity has the attachment, like the way a stripped lawn looks.

 

[In Utopia]

Like snow plows I'm not familiar with what you are talking about, mind sharing.

 

[Kevin1]

Looks good, how about a picture of what you fabricated.

 

[BillK01]

Here is a link to the YouTube video a guy did showing the striper he made. I used this for building mine. I'll try to snap a pic of it later and upload it but the video below outlines it well.

https://www.youtube.com/watch?v=Jp-nTjfy0jA

Basically just a piece of schedule 40 PVC pipe cut to the same width as the rear tires, cat 0 pins in each cap and filled with sand then cemented shut. Just hangs off my quick hitch with a couple small pieces of chain and some links. About $60 in materials and maybe 45 minutes to build it.