Ezee On Loader for L245?

[MoCabin]

I have an opportunity to purchase a Ezee On Series 40 loader that is curently on a Kubota L200. I need to know whether it will fir my L245F. thanks

 

[Eric McCarthy]

Never heard of it myself.

 

[Eric McCarthy]

It appears they have been acquired by Buhler which now sells them as Farm King. After reading this post from another forum it looks like they have alot of issues with the cylinder packing and seals. So be prepaird to do some repair work. If you happen to have the model number here's a listing of what size tractor they will fit.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=ttalk&th=306724>

http://www.buhlerindustries.com/index.php

http://www.farmequipmentfinder.com/search_all.php?make=Ezee-On&type=Tractor_Attachments

 

[MoCabin]

i just found out it is a model 2040.

 

[Eric McCarthy]

Website says it'll fit tractors from 20-40hp but I think it might be a tad bit too big. My concern is the 8 foot 10 inch lift height could be kinda high for such a narrow tractor and cause you to flip over if you're not careful.

 

[MikeL]

Any loader on an L245 makes them unstable as soon as the bucket is off the ground. I have had mine on 2 wheels so often I should sell tickets for the thrill show.

 

[MagKarl]

I haven't had much of a stability problem on my L245DT, but my rear wheels are set out at the max width. I've had it up on 3 wheels a few times, but only when on steep ground or crossing a ditch, etc. Never had a problem feeling tippy on reasonable slopes.

 

[Eric McCarthy]

Does your loader reach up to 8 feet in the air??