BX 2370 Wheel Weights

DavyW

New member

Equipment
BX2370, Z422 and L2501
Aug 29, 2016
25
3
3
Newport, NC, USA
I am interested in adding wheel weights and liquid to my BX2370...Where is the best place to buy the wheel weights?

thanks..Davy
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,405
2,204
113
Bedford - VA
I am interested in adding wheel weights and liquid to my BX2370...Where is the best place to buy the wheel weights?

thanks..Davy
Loading the tires is simple and easy...WWF might cost ya $25. The weights on the other hand will cost a plenty, whatcha got on the rear end? If'n I needed extra weight on the rear, and my rear was empty most of the time, I would make my own ballast box, that way I can take it off when I do not need it and 3 point it when I do!;):)
 

TripleR

Active member

Equipment
BX2200, BX2660, L5740 HSTC, M8540HDC and some other tractors and equipment
Sep 16, 2011
1,911
8
38
SE Missouri
I got mine from my dealer, you might check with EA Attachments or Lonestar.
 

Attachments

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,205
2,860
113
SW Pa
I filled my rears on my 2360 and it did make a world of difference, gave me about 45 pounds per wheel, now that might not seem like a lot but trust me it is. Found at a yard sale weights off an old Cub,, they bolted up I just needed some reallllly long bolts paid I think 35 bucks they are 45 pounds each and my fat old arse on there ,,, well I got all the weight I need,, Also you can take a small rubber made tub and put a pipe through it, so it will fit the 3pt and fill with cement,, and you can take it off when you dont need it.. Look around in here theres a lot of ideas on how to add weight,, and if you can find a bar bell set at a yard sale you can add then to the 3pt of fine a metal suppler and have them cut you out a couple and drill holes for bolts,,, I know of an old timer that took 2 5gallon buckets figured out where the bolt holes were and filled them with cement they wobbled a bit when he drove it but they were cheap and easy
 

edwardsonmark

New member
Apr 8, 2016
39
0
0
43
US


Here is not a very good picture of mine. Came off a 445 John Deere and are same ones offered for 1025 r. They are spendy and weigh about 175# per wheel. Luckily I got them off the Deere before trade in!

PS don't mind my daughter's frilly cup in the pic!
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,205
2,860
113
SW Pa
Those wheel weights are like everything on a deeeeerrrr dead weight,,,lol,,, OK Im sorry if I upset and green fans,,,,, ahh no wait,,nope Im not :D
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,405
2,204
113
Bedford - VA
Those wheel weights are like everything on a deeeeerrrr dead weight,,,lol,,, OK Im sorry if I upset and green fans,,,,, ahh no wait,,nope Im not :D
kinda like someone told me a long while back .....

taking out the trash!

 

DavyW

New member

Equipment
BX2370, Z422 and L2501
Aug 29, 2016
25
3
3
Newport, NC, USA
Thanks guys for the feedback..... I am going to try filling the tires first and make a ballast box for the back....

This is a great site and I enjoy the sharing of information... I am a new tractor owner and have a lot to learn.

Thanks
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,205
2,860
113
SW Pa
Welcome to the orange Dave,, and there is more info in here than you can shake a stick at, plus some good natured ribbing once in a while:D