BX 2230 no start after rebuild

dhbassdad

New member

Equipment
BX2230
Sep 27, 2019
1
0
0
Marshfield
BX 2230 not start after rebuild

does anyone know what possibly could be wrong. I put new rings in tractor, it will not start. while starting it will puff smoke out of oil cap
 
Last edited:

js5020

Member

Equipment
BX23S
Jun 27, 2018
75
2
8
PA
Re: BX 2230 not start after rebuild

Well diesels pretty much only need fuel, air, and compression to run sounds like your missing one. How far of a tear down did you do, is the cam in time with the crank? Is the injection pump in time? Do you have compression? Did you bleed the fuel at the injectors? Is the fuel shutoff valve working? Is it turning over fast enough to start?
 

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
548
83
USA
Puffing 'smoke' out the oil fill cap is excessive blow by. Did you space the ring end gaps properly when assembling?
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,287
2,241
113
Peoria, AZ
Are you sure they are right side up? Some rings are directional.