So this is now the second time this issue has presented itself, the first time I simply reattached and reset the C-Clip. This time it was the end off the day and getting dark and cold so I just put the lever assembly and C-Clip on the garage work bench until I have some time to fix it again.
I wanted to hop on here and see if anyone else has had the issue of the mount lever pulling right off the BH mount frame when detaching or attaching the BH to the BX23s. I have the feeling that a C-Clip is not enough to prevent pulling the lever off. I am just wondering if there is a fix for this or just a fault in the design that I need to keep an eye on for the life of the tractor (which would be pretty disappointing).
If you are curious what I am talking about see this parts diagram: https://www.messicks.com/ku/96462 > Frame > B04400 Mount Lever > Parts 130, 160, 190, 170 pulled right off when engaging or disengaging the mount clamp.
I wanted to hop on here and see if anyone else has had the issue of the mount lever pulling right off the BH mount frame when detaching or attaching the BH to the BX23s. I have the feeling that a C-Clip is not enough to prevent pulling the lever off. I am just wondering if there is a fix for this or just a fault in the design that I need to keep an eye on for the life of the tractor (which would be pretty disappointing).
If you are curious what I am talking about see this parts diagram: https://www.messicks.com/ku/96462 > Frame > B04400 Mount Lever > Parts 130, 160, 190, 170 pulled right off when engaging or disengaging the mount clamp.