B3000 with 2 stage blower

[Tmac60]

Just purchased a B3000 with 63" two stage blower. The blower was delivered in original crates with some assembly required, which is what i preferred. I figured the best way to know what i have is to assemble it myself. Things are going pretty good so far on that project. My question is, after its all said and done, how much work will it be to change between the FEL and snow blower? Will I have to actually unbolt the sub-frame attachment from the tractor each season to put on FEL? How long does this take if so?
Thanks

 

[meanjean]

You will be more likely to receive a reply if you post this in the tractor operating section.

 

[CBMAMF5]

Hi
I have a B2630 with front mount blower. You do not have to remove the subframe to change between the FEL and Blower. The blower head lifting frame goes on easy...one guy can do it no problem. 15 to 20 minutes to swap between them and I would bet faster if a guy does it all of the time.

 

[Tmac60]

Thanks CBMAMF5, that is exactly what i was wanting to know. I was concerned that all that sub frame hardware had to come off every season. Hoping for LOTS of snow this year..