B2650 price check

MikeBo

New member

Equipment
B3350,and a GX110
Mar 22, 2015
26
0
0
Stilwell
We'll have a new B2650 a few hours from me for $18.2 with a FEL, and a 72 inch mowing deck? Please provide some perspective..

I just have the fear I will regret not getting the B3350, but they are significantly higher
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,708
2,482
113
Bedford - VA
We'll have a new B2650 a few hours from me for $18.2 with a FEL, and a 72 inch mowing deck? Please provide some perspective..

I just have the fear I will regret not getting the B3350, but they are significantly higher
I too agree with CJ ? can you give us the 3350 price - lot more ponies - same frame and tires - just more grit! The 3350 is a four cyl as the 2650 is a three cyl -

if you are going to just cut grass - then get the 2650 , if you need more HP for FEL or anything else get the 3350.

Same rear end lift, same footprint, little heavier with the 3350......
basically it is all about the horsepower .....and the 3350 has a goooood bit more !:) like almost 30%:eek:
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,525
3,264
113
SW Pa
I just checked the big "K" site build my Kubota,, and the B2650 with FEL and 72 inch deck lists for 23,370,,,, the 3350 about 5 k more, NEW..., sounds like not to bad a deal,, just MHO
 

MikeBo

New member

Equipment
B3350,and a GX110
Mar 22, 2015
26
0
0
Stilwell
Sorry for the delay, I was traveling for work. The 3350 was almost $5K more...that's a bit heavy to justify...
 

Bmello

Member

Equipment
B2650
Oct 10, 2014
31
0
6
Creighton, missouri
I got my B2650 with a 60 inch cutter and bb with the front loader for right at 17k. It was a year end blowout but was a great deal.

Love this thing. It is probably the best purchase I've made this decade.
 

MikeBo

New member

Equipment
B3350,and a GX110
Mar 22, 2015
26
0
0
Stilwell
I got my B2650 with a 60 inch cutter and bb with the front loader for right at 17k. It was a year end blowout but was a great deal.

Love this thing. It is probably the best purchase I've made this decade.
Thank you, I am going to get one...just trying to get a good deal closer to home, I went back to my local dealer and they want $22K for one, I have found 3350 set up the same way for that much.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,728
5,392
113
40 miles south of Kansas City
Mike, buy the unit you want at the best price you can get. Don't worry much about the local dealer for service or parts. They will do the work for you and sell you parts, no matter where the machine came from.

Might go back to that local dealer and show them the quote you have, and when they can't match it, ask if they'll service it when you buy it from their competitor. THEY WILL.

I own 4 Kubota tractors, (none under warranty, they're too hold) but I have no problem with parts. I bought 2 new from O'dell Tractor (now one of the 3 Coleman stores). I never went back to them for anything but oil and filters. Never had an ounce of trouble with either tractor. Still have the B8200.

The dealers around here will be helpful. I needed a seal to put a tractor together last week. I called Coleman's in Bonner Sp. they didn't have it and would have to order it. Called Storrer Imp. in Iola, called Romans in Louisburg. All could get it, but have to order and I was impatient. Romans offered to look to see where it would be, or where I might find one quicker. Turns out in Durant, OK. She tells me 350 miles away. I called Durant. They had it, but to mail it to me it would go out the next day (mail had already been picked up for that day), go to Dallas, then to Tulsa, then to KC, then to me! I looked on line again and found one in Smithville, MO (yes at the other Coleman location). Picked it up the next day in Bonner!
 

Bmello

Member

Equipment
B2650
Oct 10, 2014
31
0
6
Creighton, missouri
Agreed. I did the same thing. Went to Colemans in Bonner and started looking as it's about 1/2 mile from my house but found my deal just south of Harrisonville Mo. Turns out that it's also about 50 miles closer to our farm In Creighton MO.

Kubota dealer typically work really well together on supporting each other and kubota products in general.
 

MikeBo

New member

Equipment
B3350,and a GX110
Mar 22, 2015
26
0
0
Stilwell
Agreed. I did the same thing. Went to Colemans in Bonner and started looking as it's about 1/2 mile from my house but found my deal just south of Harrisonville Mo. Turns out that it's also about 50 miles closer to our farm In Creighton MO.

Kubota dealer typically work really well together on supporting each other and kubota products in general.
Bmello, what's the dealer south of harrisonville? That's not far from me? Thanks
 

MikeBo

New member

Equipment
B3350,and a GX110
Mar 22, 2015
26
0
0
Stilwell
Heartland Tractor - used to be Hartzler Equipment. Really good folk there and highly recommended.
Went there today, got a great deal on a B3350 and bought it, my search and flip flopping are over...thank you BMello
 

Jason G

New member

Equipment
2014 B2650 and 1981 T1400 (Mainly my back)
Sep 19, 2014
35
0
0
Monticello Fl
I struggled with exact situation. Didn't want diesel filter (b3350), but didn't think b2650 was enough HP. L3200 was almost a go. Then wife sat on b2650 and just felt better on it than the L. So...I bought the b2650. Right around 17500 with loader bucket and delivery. Plus tax close to 20. But, I love this thing. Plenty of power, nice size, and comfortable. I feel my 26 will accomplish anything the 32 could, plus able to get in tighter spots. Good luck and keep us posted.