B2650 50hr Service +

LOMartin

Member
Lifetime Member

Equipment
B2650HSDC / B77 / FEL / LP Grapple
Jul 14, 2018
46
0
6
Savannah, Georgia
I'm want to go the extra mile on my 50hr service and change ALL fluids and filters.

Could you all double check my list, i'm going to try my local dealer tomorrow morning or just order from Messicks if the local guys don't have everything.


- Fuel Filter
- Engine Oil filter
- Engine Oil @ 4.2qts Kubota SAE30
- Transmission Oil HST Filter
- Hydraulic Oil Filter
- Transmission Oil HST Oil @ 4.0gals Kubota Super UDT-2
- Front Axle Oil @ 5.0qts Kubota Super UDT-2

Am I missing anything?

Thanks all.

Updated. Edit
 
Last edited:

Fordtech86

Well-known member
Lifetime Member

Equipment
L3200
Aug 7, 2018
4,870
5,723
113
Pineville,LA
5 gallons in the front axle?:eek:

Does the 2650 have 2 filters for the hyrdaulic system?
 

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,169
711
113
Hadashville, Manitoba, Canada
Add the hydraulic oil filter. There's 2 hydraulic oil filters, transmission (HST) filter and hydraulic oil filter.
And the front axle takes way less than 5 gallons UDT oil. It uses 5 US quarts, and you can use way less expensive 80w/90 gear oil in the axle.
Why have you decided to replace all the hydraulic oil now instead of at 400 hours as indicated in the manual? Are you trying to address a specific problem?
Either way, when you remove the hydraulic filters look carefully for metal bits/shavings on the filter or in any escaped or drained UDT fluid and record machine hours and photograph it to show Kubota dealer. It may affect any warranty issues down the road.

Sent from my Moto G (5) Plus using Tapatalk
 

LOMartin

Member
Lifetime Member

Equipment
B2650HSDC / B77 / FEL / LP Grapple
Jul 14, 2018
46
0
6
Savannah, Georgia
Edited first post to reflect correct info. I missed up Qts for Gal. Lol.

@nbryan smart move. I will do that.
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
Another recommendation for Synthetic Fluids..
Remember to grease all fittings and Torque Wheel Lug Nuts & Torque FEL lug nuts/bolts..
 

Muzzy

Member
Lifetime Member

Equipment
B2650HSDC
Feb 13, 2019
274
4
18
WNY
Darn, forgot to mention, blow out/clean Radiator Screen & Air Filter..
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,213
2,872
113
SW Pa
One thing about blowing or washing the radiator DO NOT USE YOUR PRESSURE WASHER, your garden hose will clean it out well enough,, just sayin
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
8,439
4,116
113
Chenango County, NY
I think you’ve got it, and add the other guys chores. Good for you!
You’re doing what I did for my BX at the time 6 years ago.
Only thing I would comment is that the front axle may not take the specified volume. It comes up here on OTT periodically. It just doesn’t drain everything out, so takes less on refill. Just watch level for a while after...
Best of luck and enjoy learning things about your tractor!


Sent from my iPhone using Tapatalk
 
Last edited:

LOMartin

Member
Lifetime Member

Equipment
B2650HSDC / B77 / FEL / LP Grapple
Jul 14, 2018
46
0
6
Savannah, Georgia
About switching over to synthetic motor oil.

Will that affect the warranty?


I use Rotella T6 in the super duty but wouldn***8217;t want to mess up my warranty with kubota.

and thanks all for the quick answers. The hive mind and wealth of knowledge here is great. Thank you.
 

rkidd

Active member
Lifetime Member

Equipment
B2650, FEL With QA 60"mmm, 3pt FDR1672,homemade ballast box, BB 1572 box scraper
Dec 7, 2015
743
67
28
Jefferson Ohio
I'm want to go the extra mile on my 50hr service and change ALL fluids and filters.

Could you all double check my list, i'm going to try my local dealer tomorrow morning or just order from Messicks if the local guys don't have everything.


- Fuel Filter
- Engine Oil filter
- Engine Oil @ 4.2qts Kubota SAE30
- Transmission Oil HST Filter
- Hydraulic Oil Filter
- Transmission Oil HST Oil @ 4.0gals Kubota Super UDT-2
- Front Axle Oil @ 5.0qts Kubota Super UDT-2

Am I missing anything?

Thanks all.

Updated. Edit

You have it exactly correct. I have done mine many times with 1100 hrs on it. When putting in the new oils, put in less than the quantities speced out, start and recheck, to top off. Also remember to check belts, hoses, and lugnut torque on all of the wheels.
Also, wax your toolbox!! Haha.
 
Last edited:

LOMartin

Member
Lifetime Member

Equipment
B2650HSDC / B77 / FEL / LP Grapple
Jul 14, 2018
46
0
6
Savannah, Georgia
You have it exactly correct. I have done mine many times with 1100 hrs on it. When putting in the new oils, put in less than the quantities speced out, start and recheck, to top off. Also remember to check belts, hoses, and lugnut torque on all of the wheels.
Also, wax your toolbox!! Haha.
Ha. Thank you sir.

I appreciate your time in making that tool box the thing is solid, looks OEM and will outlast the tractor.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,614
1,132
113
Kansas City, KS
About switching over to synthetic motor oil.

Will that affect the warranty?


I use Rotella T6 in the super duty but wouldn***8217;t want to mess up my warranty with kubota.

and thanks all for the quick answers. The hive mind and wealth of knowledge here is great. Thank you.
It will not affect your Kubota warranty.
 

LOMartin

Member
Lifetime Member

Equipment
B2650HSDC / B77 / FEL / LP Grapple
Jul 14, 2018
46
0
6
Savannah, Georgia
@whitetiger

That’s good to hear, thank you.


I’ll update for future searches shortly how much all this cost.