Ok I finished my install of my LandPride third function kit 380-149A. Needless to say the instructions suck.
I am wanting to confirm that I completely remove the tube going from the power beyond port and the connection below the seat and then run my lines to these points. It looks like the connection below the seat will be very tight with the connectors they supplied and it is very close to the seat mount, had to put an extra turn on the fitting to get a flat side up.
I have been unable to test it as I am waiting on two female quick disconnects for my thumb attachment. Does anyone have a link for something that will fit the male quick disconnects that landpride supplies with these. Kubota ones on my loader are not the same.
I am wanting to confirm that I completely remove the tube going from the power beyond port and the connection below the seat and then run my lines to these points. It looks like the connection below the seat will be very tight with the connectors they supplied and it is very close to the seat mount, had to put an extra turn on the fitting to get a flat side up.
I have been unable to test it as I am waiting on two female quick disconnects for my thumb attachment. Does anyone have a link for something that will fit the male quick disconnects that landpride supplies with these. Kubota ones on my loader are not the same.