Ag Connectors

[adventure bob]

Just ordered the grapple for my tractor. and noticed that my third funcion lines are cappe without quick disconnects on them.

Anyone know the size and pitch of the Kubota 3rd funciton lines?

Also looking for recomendations on where and what to get for the discos.

Grand L60

 

[North Idaho Wolfman]

Most lines are 3/8" or 1/2" pipe thread, post a picture and I might be able to tell.
I personally like skid steer type Flat face connectors, they are cleaner and disconnect easy even under pressure.
I get sets of them off EBay for fairly cheap.

 

[Bulldog]

You can get standard remote at TSC or from your dealer.

 

[RDR]

You can get standard remote at TSC or from your dealer.

Does anyone know what kind of male end I need to go into the remotes on my M5400? I didn't think to ask when I was at the dealer getting blades for a mower.

 

[Bulldog]

Something like this http://www.tractorsupply.com/en/sto...-in-16-orb-fits-all-current-models-ball-style should work. Depending on what size line you have might need the 1/2 coupler. http://www.tractorsupply.com/en/store/pioneer-standard-tip1-2-in-standard-iso-tip-1-2-in-nptf

It should be pretty easy to find what you need. Couplers are tractors are for the most part simple to find.

 

[RDR]

Something like this http://www.tractorsupply.com/en/sto...-in-16-orb-fits-all-current-models-ball-style should work. Depending on what size line you have might need the 1/2 coupler. http://www.tractorsupply.com/en/store/pioneer-standard-tip1-2-in-standard-iso-tip-1-2-in-nptf

It should be pretty easy to find what you need. Couplers are tractors are for the most part simple to find.

Thanks. I didn't know Kubota was compatable with pioneer. I have some and will try one.

 

[Bulldog]

RDR, I made the assumption that you were talking about the rear remotes. If that be the case the pioneer couplers should be fine.