Search results

I had the same thing happen to mine and took it to the dealer to fix. They had to take the hst apart. there was a chunk of case sealer jamed in the pto valve that prevented it from working. I was blowing snow with it when it just stopped working. Thankfully mine was still under warranty.

I just got a set of 1 1/2 inch ones from the dealer. Rather expensive but well worth it.

When I was a logger I learned to clean it every day. Every day after I use my tractor I pull the air filter and just bang it gently on the bucket or tire and that removes the dust and debris that has accumulated in it. Some days it is really loaded up.

What I learned is don’t tighten over 8 pounds. I was breaking shear bolts all the time till I learned that.

I got mine from Amazon.

I bought a piranha bar for my BX23S from bxexpanded. It works very good and is very easy to install. Just drill two holes and bolt it on.

I’ve had one of these in my tank for a couple of years. I took my tractor to the dealer to get some work done on it and the owner of the dealer ship said he had never seen anything like that before and he was going to buy several of them to sell.

I use chainsaw bar and chain oil.

I have the same snowblower and had the exact same problem. One blade on the impeller was bent and was scraping on the housing. I just ran it and in a few minutes it was fine. I’m going to have to replace the impeller on it. Darn large rocks really do a number on it.

I have a Fort Knox for the ball couplers on my trailers. Also have a lock on the ball keeper, also have a padlock on the chains, also have a flip on the jack and have a padlock on it so that it can’t flip up out of the way. I had a duelly pickup back up to one of my trailers in the middle...

Looks like an improved version of the rome plows in Vietnam.

They broke it and had to disassemble it completely.

I had the same thing happen on my BX23S while blowing snow with it. I just quit. I took it to the dealer and they had to open the hat. A quarter size piece of case sealant broke loose and plugged the valve for the pro. They had never seen anything like that before. There was 525 hours on it...

I drill out the hole or slot to make it work. That’s always been my solution.

BXpanded has a skid plate, belly pan that you need to put on. It protects the hst fan and I know from experience that you don’t want to have to replace that fan. I got a stick in mine and it took all the blades off of it. They also have a piranha bar. It’s a toothed bar for the fel. They...

I got them from the Kubota dealer

I have 1 1/2 " ones on mine for the same reason. It sure made a difference, I'm not near as nervous on the hills as before.

I have a 2017 BX23S and the pto quit working while I was blowing snow last winter. A glob of sealer on inside of the hst had broken off and lodged in the pto valve. That was the problem on mine. The dealer had never seen anything like that before.

We have a 1000 gallon tank and just got it filled for $1.98 a gallon. Last year it was just short of $3.00 a gallon.