Cats are the effective in my opinion. When we moved into our place, there were mice everywhere outside. After getting the farm cats, we received multiple gifts of rodent parts from the cats at our door, showing their hard work!
It is very rare to see one in our yard now.
Sent from my Pixel...
I got two remotes when I bought mine. I use them for my disc mower and when I use the coops fertilizer spreader.
They are nice to have!
Sent from my Pixel using Tapatalk
I use it on the BX. It can be a bit tight between the tip of the auger and the ground, but if I have far to travel, I use a ratchet strap to fold up against the frame of the digger. The top of the auger pivots where the gear box attaches to the frame, which make it easy to fold up and flex as...
I have a rear blower and it works great. A 5ft Frontier blower.
You get used to looking backwards, plus it's nice to have the loader for other work. I would imagine you can have a much larger rear blower than front blower.
Attaching the blower on the three point is pretty easy. It doesn't...
I have one of these, they work well.
It takes extra passes the first time, but easier after that.
https://www.echo-usa.com/Videos/Bed-Redefiner/Bed-Redefiner/?lang=en-US
Sent from my Pixel using Tapatalk
I have moved bales with my MX5200. Most have been 4x4 or 4x5.
I don't go through a lot, nine this winter I use a mix of round and small squares for my sheep.
Sent from my Pixel using Tapatalk
I have both a quick attach (BX) and the telescoping arms (MX).
I try to keep the implement on a pallet or blocks, makes it easier to attach and keeps it out of the water and mud.
Sent from my Pixel using Tapatalk
I did. I was going to do that too. However, it was hot all the time and I didn't want to add a switch. I may do that later. I ran out of time.
Sent from my Pixel using Tapatalk
I wanted to add lights off of the tail lights and they run off of a 5 amp circuit, not the 15 amp work lights circuit. The 5 amp circuit is for the light switch too.
I wasn't able to determine if that 15 amp work light circuit even ran to the back of the tractor.
Sent from my Pixel using...
Google sheets can be used offline too.
https://support.google.com/drive/answer/2375012?co=GENIE.Platform%3DAndroid&hl=en
Sent from my Pixel using Tapatalk
Google Sheets is pretty easy. You can format it anyway you want and acres it anyway. Pretty ready to share with others too.
Sent from my Pixel using Tapatalk
This thread seems to follow a similar pattern....
https://r.tapatalk.com/shareLink?url=http%3A%2F%2Fwww%2Eorangetractortalks%2Ecom%2Fforums%2Fshowthread%2Ephp%3Ft%3D38343&share_tid=38343&share_fid=18850&share_type=t
Sent from my Pixel using Tapatalk
On my MX, if I turn the tractor off and turn the PTO switch to "on" then I am able very easily turn the PTO shaft on tractor by hand to line it up.
On my BX, I just switch the PTO selector to the MMM. Then I am able to turn the PTO shaft by hand.
I have an Echo blower, two Echo chainsaws (50 and 60 cc), Echo tiller, one Echo trimmer with a steel blade and another Echo PAS280 trimmer (swappable ends - paddles, power pruner, and edge re-definer).
Great equipment, like my Kubotas.