Search results

You'd have to modify the pull back to add a rubber edge up top, as the edge is welded to the whole top section. On the bottom edge, you can remove the steel edge and I believe they sell a poly or a rubber version that bolts in place. Uses normal cutting edge/plow bolts. I think the 60 is...

People have been using buckets for snow removal since they started making tractors, and they are probably fine. I feel like the push box is significantly easier and cleaner to use. Plus you have a cutting edge that is replaceable vs beating up the OE bucket. If I had a long driveway I would...

Thanks for all the replies everyone; much appreciated! I got a decent price on it; lightly used from someone fairly local, so that helped with my choice. I don't have many good dealers around me for tractors or implements, so I didn't look around too much in person. My SPL05 has the...

I bought a Land Pride SPL0560 snow pusher 2nd hand for my BX25 last season (toward the end) and used it a few times. It works great, but I realized when I hooked it up this year that the center pin doesn't have a grease fitting like the OE kubota pin for the OE kubota bucket. I checked the...

I bought a plow for my BX this year to plow a gravel driveway and small parking area. I did a bunch of reading on plowing snow on gravel, and quite a few people suggested putting a piece of pipe over the cutting edge of the plow. So I did it, and it does work. It gets most of the snow up...

How is the 60" pusher working out? I have been looking and couldn't decide between the 60 and 48. I have the plow blade now and it works OK, but I have large open spaces to clear and I think a pusher would be better. I seem to loose traction pretty quickly on the BX25 (with BH attached for...

message sent

Any plans to come upstate anytime soon? I'm located in Albany NY, about 2 1/2 hours away. Interested in everything but the sprayer, but I can't get down to you anytime soon.

Thanks for all of the suggestions and info! Last night I changed the engine oil with T6 (use in my VW TDI engine also), and a kubota filter. I topped off the HST with kubota Super UDT2 (about 1 qt low!), front axle level was perfect. Air filter was good, no leaves or anything stuck to it, and...

I just bought my first piece of equipment, a BX25D, with 7.5hrs on it. It is a 2014 model, and it was used at a Deere dealership as a 'demo' tractor so people could compare it to the Deere without having to go to two different dealerships. It still had all of the paint on the cutting edge and...

I bought a used front BX2750D blower with BX2751 quick hitch and BX2752 mid PTO. But I need the longer BX2753 mid PTO shaft to fit my BX25D machine. From what I've read the BX2752 is 11 1/2" long and fits BX22, BX23, BX1800/BX2200, and BX1850/BX1860. This is the one I have! The BX2753 is 14...