Search results

Yes, there are two hoses that come off the joystick and connect to the tractor and I have two levers in the cockpit of the tractor and 2 remote valves at the rear of the tractor,(4 connection ports). I was hoping to find connection points closer to the joystick rather then having to add hoses...

Jim thanks for your reply. Do you plumb both pressure and return at the union fitting? In other words, remove coupler and plumb a fitting on one end of the pipe and another fitting to the other end of the pipe, right along side each other. Thanks again Randy

Hi It doesn't appear that I have a power beyond port to hook my FEL to. So my question is can I use the rear remote valves that are one my M4950 Kubota? I have two remote valves with two ports each, and two onboard levers. How would I go about hooking my FEL up and would I use those two onboard...

Hi I posted this in the Attachment forum and i think it would be better posted here. Can I wire the glow plugs in the following manner? From the hot side of the three position ignition switch to the glow plug controller and then to the first glow plug and then daisy chained to the other 5 glow...

Working on hooking up the FEL and I'm stuck on finding a attachment point for the hydraulics. Any help is appreciated Thanks Randy

Hi Trying to solve a hard cold starting problem. I've ordered new glow plugs and a new glow plug indicator. My question is about wiring I was hoping I could run off the back of the ignition switch thru the glow plug indicator and then to the first glow plug and then daisy chain from one glow...

Wolfman Thanks for the info. Would you tell me where that plate is located? I've read that there is a place under the right foot plate but I don't see anything under there. Thanks Randy

It's a a Bush Hog brand 2426 FEL WTH a single lever joy stick

Hi I have a Kubota M4950 tractor with dual remote control valves in the rear. Is that the only place to connect the hydraulics for the FEL? The loader has a single lever, do I use the joystick or do i use the two levers that are behind my right knee? Any help would be appreciated! Thanks Randy

Disregard, I found the correct part number and picked up a new unit

Re: Kubota m4950 tach drive unit Hi, I'm new here and don't know my way around yet. I've read that Parts Dept Vic has a video on how to repair the tach/hour meter drive unit but I can't find it, can anyone give me a link to that video,? Thanks Randy

Kubota m4950 tach drive unit not working Hi My tach drive unit is broken and I can't see any way to disassemble it to repair. My tractor is a M 4950 and the piece inside the drive doesn't spin. I would like to buy a new one but I can't find one Any help would be great Thanks Randy