Search results

Hello out there anyone. I'm looking for a loader to fit my L3250. The Kubota model I believe is a BF550, But I'd take a knock off if it's a good unit. Thanks, Greg A

I believe I have the wiring diagram... but schematics make my eyes glaze over. I was hoping for a quick answer which you gave regarding the flasher. T I will check it out. Thanks Mucho! Greg A

When I purchased my L3250 approximately a year ago, I only had front head lights working. With the warm weather, I've been tinkering around and traced down wiring to the rear tail light (red), so now it works too. The trouble I'm having now is the rear flashers still do not work. I've replaced...

Well... amazingly I got back into the access opening and took another look using the diagrams and realized there was in fact 3 lock nuts. I did loosen each one, turned the adjusting screw in to the plate, and then backed of 3/4 turn... locked them back down, warmed up the tractor, clutched the...

Thanks for these diagrams. Perhaps now I can match up these diagrams to what I can see from the side view and figure out what's going with this Tractor. If It does need to come apart, due to lack of funds I might try to get through this up coming season with some light use and split it next...

Wow... not what I wanted to hear! Thanks though.

NO... when I dead start the tractor with PTO engaged and clutch pedal depressed the PTO shaft turns immediately as if if no clutch.

Got it. When I removed the access panel only one lock nut is visible. I marked the nut, and turned the disc by hand one complete rotation. I don't see anything else in there looks adjustable. The friction disc spins freely with clutch pedal depressed, and it snugs up tight to the flywheel...

No loader on my machine. I did take the access cover off and the only thing that looks adjustable in there is one lock nut that can be loosened. The friction disc (it looks like 2 discs actually, fairly thin at that) spin free with the clutch pedal depressed and snug up tight when I let off the...

If I dead start with PTO engaged, I can only cycle out, but can't get back in with clutch.

Still needing help with my PTO/clutch issue. Based on the feedback, I pulled the clutch cover plate just to see if I could make the adjustment myself. From what I read I thought there would be 3 adjustment screws for the pressure plate, that you could adjust one at a time by turning the...

Appreciate it, Thanks!

yes, you've diagnosed the situation. As I read some of the info for adjusting screws... my access cover plate seems to be on top of trans housing towards the flywheel. I will look again tonight for an access cover on the right side, unless maybe you can tell me the L3250 access cover is on...

Hello anyone, I have an L3250 (4X4) that I cannot engage the PTO by clutching. When it happened earlier in the year, I adjusted the linkage to the clutch pedal and thought I fixed the problem, but that only lasted a time or two. IS my clutch wearing out (i believe its a dry clutch 2 stage)...