Search results

Start switch on. Engine warning light on, buzzer sounds continuously. Park and auto regen lights do not come on during prove out. Tractor has 388 operating hours. What is causing the issue? Dirt mover

Thank you, That's what I will do

I need clarification here. The owners manual talks about the level on the dipstick. However; it does not say if the cap should be screwed in and removed to check level or just insert it and rest on the case to take the reading. Dirt mover

Whitetiger, That is exactly what I did. thank you for the confirmation. Regarding match marking before disassembly, I normally make it a practice to do that. In this case I let the repair manual influence me and I failed to do so. I was surprised that I did not find any witness marks...

I am a bit confused here. I removed the flywheel to check for an oil leak. The flywheel has index marks for TDC and degrees. I can find no alignment match marks for the flywheel and crank. So, reinstalling the flywheel will be random position in relation to the crankshaft nullifying the marks on...

Thank you for your help. Dirt Mover

Good morning and Happy New year. I need a repair manual for my BX 2200. Can someone share one with me? Thank you Dirt Mover

Is it possible to copy and post the diagram here? Thanks DM

Thanks, I thought so. What I have is an Auto DPF switch which will not light up when pressed but does work on prove out. The Park switch does the same thing. DM

Thank you. It does show layout. that is helpful. DM

Is there any possible way the seat switch ties into the Park and Auto regen switches? DM

Looking for a B3350 wiring diagram anybody have one? DM

I know it its picky but don't forget the safety jack stand. DM

I topped off and it took 6 gallons. That says I had 1.1 gals remaining. Now I know 2 bars is fill up time. It is possible I ran it a little when bar 2 first showed. DM

Mine is a B3350 DM

I must be confused about this. My B3350 manual states " this will control the working depth of 3-point hitch mounted implement regardless of the amount of pull required". Now, I have a ballast box on mine with about 300 Lbs in it. With the position control in 5 the 3pt will "leak" down while in...

Thanks everybody for your input. @ 2 bars now. Going to top off and see how much it takes. DM

Just wondering has anyone done a "dipstick" measurement versus quantity indicator markings. I measured mine with the quantity indicator showing two bars, my stick measured 4 inches of fuel in the tank. Have no idea what that is in gallons or portion there of. DM

Go to everything attachments.com. They have what you need. DM

I have a B3350 with the DPF system. Here is my experience with it: As soon as the tractor engine is started push the AUTO REGEN switch light. The auto regeneration is now on. Go about your work. When the system needs to regenerate it will automatically regenerate while you work. I find that it...