Search results

  1. B

    MX 5000 Clutch Replacement

    https://www.manualslib.com/manual/1233781/Kubota-Mx5100.html?page=232 Think I may have found what I am looking for.
  2. B

    MX 5000 Clutch Replacement

    Thanks Ill look today. I crawled under yesterday and was not sure what had to unbolt to remove shaft. Cars and bikes are not a problem but this is a first.
  3. B

    MX 5000 Clutch Replacement

  4. B

    MX 5000 Clutch Replacement

    It is 4 wd. I tried turning the flywheel with pry bar. Doesn,t seem to be rubbing against the shaft. The pto shaft going into the rearend came out part way when I seperated the two. I got it to slip back into whatever it is supposed to be in. Would not turn once I felt it go in.
  5. B

    MX 5000 Clutch Replacement

    Ok I am putting new clutch kit in. Have everything lined up. I can get the halves together except for the last 1 1/2" I have jiggled everything possible. Pulled back apart and realigned disc in pressure plate. Still cant get past the last inch or so. Any ideas?
  6. B

    MX 5000 Clutch

    I have been babying my clutch for a few years now. It always grabbed good just would grind a little when I put it in gear. Got worse the hotter the tractor got. Couple days ago went to put hay out and turned a corner and it quit moving. Sounds like a gear stripped. I can push the clutch in and...
  7. B

    MX5000DT remote hydraulics

    Long shot but did you ever sell this?
  8. B

    Clutch time is in my future

    MX 5000 utility 2004 My clutch pedal has slowly got to the point where it grabs at the very bottom. If I use it for a few minutes going back and forth pushing brush it gets to the point where it wants to grind going in gear. I have tried adjusting the clutch but then you can hear the throw out...
  9. B

    MX 5000 drawbar wanted

    Looking for one that goes under tractor or the part number.
  10. B

    New to the orange seen. Thinking of putting rear remotes.

    Thanks for the repliesso far. Stopped and looked at new ones the other day. Would like to move controls that are mounted on the QT front loader and mount it to the loader mounts with QC for the loader when I take the loader of I will have the controls for other attachments.
  11. B

    New to the orange seen. Thinking of putting rear remotes.

    I have a MX5000DT and would like to ad rear remotes. What is involved doing this. I have no controls. It has a loader but the controls come off with the loader. My Massey had a lever that operated one set of remotes but it is gone and not sure how they were hooked up. Probably only be using a...
  12. B

    New owner of MX 5000 (ISO) Rear Remotes ?

    I dont have rear remotes and would like to put a set on. If you have them I may be interested.
Top Bottom