Search results

Contact Kubota yourself. There is no "chain of command" when you're the customer and not getting satisfaction. I went to the VP of Chrysler before I got satisfaction on a fleet of Dodge maxivans with a fuel pump problem! It took 2 months..... Document your conversations, dates, times & who you...

Here's a couple pics to show where this oil leak is. The white arrows point where the oil comes out. Still haven't determined if it begins leaking when the loader is used or the 3 point with the brush hawg being raised & lowered. Got me a small mirror to scope it with in the morning. :) Vic...

If your B7100 is similar to my B7200 there should have been 3 drain ports plus the two screens. When I did mine the only fluid left in the filter area was within the reservoir the filter spins onto. there was a definet miniscus of fluid just waiting to over flow onto the tranny but I carefully...

Just had another hose made up at NAPA for the looader. Now all hoses are leak free. Found the left cylinder passing a slight amout of fluid but the fading is almost down to nothing! Still have the tranny leak even after draining a qt. Yup, overfilled it so ya just can't get all the hydro...

This guy uses it in his Kubota. http://www.mytractorforum.com/showthread.php?t=138585 ....b

I went to the Kubota dealer first cuz I called'm & they said "ya, sure, we can make it for about $25". So I headed in only to find they din't have the ends. They sent me over to the FLAPS (friendly local auto parts) across the street (NAPA). They din't have the ends either... I took a 2 mile...

I got the hose replaced and that slowed the front loader fade issue. found another hose leak on the loader and will have another hose made. That should take care of the loader fade. Replaced the hose by the hyd. fill port but discovered my first thot of a leak was coming from under the plate...

I'm having a similar problem with my B7200HST. Because of your post & Traildust's answer I'm hoping my vent is the culprit. Good luck & I hope I have the same! :) ....b

I was wrong as to the area of leakage. The red area is dry. It's behind that red area and runs down the side. It was leaking before I installed the new filter. I need to run the tractor & sleuth it out further. I just read in the manual that there could be pin holes that are unable to be seen...

I'm finding the top of the tranny wet with hydraulic oil. I just changed the oil & pulled the screens to clean them thinking I might fix the hyd. fade that's in the loader & 3 pt. hitch (it didn't)... New filter also. After doing all this oil changing (engine too) I went out & did some mowing...

I downloaded the WSM for my B7200HSD the other day and found the same thing... no engine chapter :confused: While looking for exploded views of all tractor parts I found Messick's web site. There is an area in the site that allows you to request an exploded view of various sections of your...

Found this site and got a downloaded workshop manual for $22! 137 pages of good stuff. Don't know yet how involved they get but it's a start. ;) http://www.tradebit.com/filedetail.php/95597314-kubota-b6200-b7200-hst-workshop-manual ......b

Workin on the tractor... Yuppers, just got me an 86 (I think) B7200 HST. Been negelcted but the bones are good. It runs great with about 2000 hrs. on him. Has a loader, brush hawg & a tiller. The lites & fuel gauge din't work & the oil was black. Had to git out int'a the shop last night...

That download has been deleted. Thanks for trying tho. Stuart; sent PM..... ....b

Hey y'all. Just became the owner of an '86 B7200 HST! Woo-Hoo! I'm excited. Does anyone know where the best site is for downloading a workshop manual. I have the owners/maint. manual. Just doesn't say enough about what I want or need to do. Thank for the great site...... b