TxTom's latest activity
-
TTxTom replied to the thread Land Pride blade nut.The old blades along a new one. It was time to replace them.
-
-
TI just got an impact socket set off Amazon for the same thing you are doing. B0CG142P4T I'm hoping they work out. I couldn't believe I...
-
TTxTom replied to the thread Land Pride blade nut.Well, I gotter done. The $120 impact wrench along with an extension and a 1 11/16 socket loosened each nut after a minute or two. Much...
-
T$16k is 80% of the cost of a brand new machine. Buy a new one complete with factpry warramty at 0% for 60 months. Dan
-
TTxTom replied to the thread Land Pride blade nut.The impact wrench I ordered is rated for 900 ft lbs and works from my Dewalt 20 volt batteries.
-
TTxTom replied to the thread Land Pride blade nut.I received a reply from Land Pride this morning. My cutter has 1 1/8" nuts that require a 1 11/16" socket. Now I'm hoping the impact...
-
TTxTom replied to the thread Land Pride blade nut.OK, now I'm thinking about ordering a 900 ft lbs 1/2" drive impact wrench from Amazon that will work with my Dewalt 20 volt batteries...
-
TTxTom replied to the thread Land Pride blade nut.I'm thinking about getting a 20"long 3/4" drive breaker bar and using a long cheater pipe to hopefully break the nuts loose. Lot's of...
-
TTxTom replied to the thread Land Pride blade nut.Yes, that foot that needs to be wedged against something solid could be a problem. I may could chain it to something.
-
TTxTom replied to the thread Land Pride blade nut.I broke about two inches off the end of one blade.
-
TTxTom replied to the thread Land Pride blade nut.I looked at this set and it does have a 1 1/8" socket, it does not have the 1 11/16" socket Could you show a link or description of the...
-
TI bought a new Land Pride RCF2072 rotary cutter in November 2020. I need to replace the blades and the manual that came with the cutter...
