Recent content by toddtjs1@yahoo.com

looking for a 1995 B 20 rt. rear fender, anyone know of any around, not sure if other b models fit also ? 585-259-8055

looked at the b20, nice tight unit no play in any bushings, maybe a couple things, 1. throttle cable and control was hooked up on dash, he said ( he's 72 ),it was too hard reaching backward for him to adjust the throttle,2. paint is somewhat faded, and 3. right rear fender has a dent, runs good...

anyone have a good 1995 b20 right hand fender ?, corner on this one is krinkled

looking at a b20, for some reason the guy hooked up a throttle control on the dash and not using the fender mounted one ?, it moves freely, cable is there, can't feel were cable comes out of cable sheath at engine, is there a linkage that breaks there ?, or are the cables noted to break ?

thanks ran good just didn't expect the noise ,a bit more than I expected.

how loud are hydro's ? tested one sat. and you hear a whinning as you drive it , not crazy loud but loud enough,seems to drive good, has power, bucket, backhoe both work good,will pick ( b20) off ground so strong to me, but noisey or normal ? i'm used to a gear tractor so this is new to...

I tried the b20 today, seems to run good, but how loud are hydro's ?,maybe i'm not used to them the whining when moving it ?, it did have good power in all ranges driving it, bucket and bh worked good also, only thing I noticed is the cable for the throttle is there but the guy that owns it put...

thanks for the info, never knew about the 30 year obsolete timeline, I believe he said the hours are orig and the meter does work, I asked that question because my L model I sold, it quit working after 900 and then after 3 hours with a new one ! I just gave up and used it and bagged the hour...

are there any weak areas to be aware of ?know prob. at any certain hours on machine ?,hydro's on these a good unit ?, thanks for the replies, any info would help, to me a lot of money to spend on a purchase if there are issues to worry about.

I'm looking at it in a week, already agreed on a price , have to take a ride to see it, I know its smaller than my l235 I had , about the size or larger than a b8200 ?, I looked at one of those but it was a well worn machine being passed off as a 450 hour machine !, the b20 is a 700 hour machine...

looking at a b20, 1995 with 3 pt., and backhoe and fel, a good tractor ?, hydro with 700 hrs from orig. owners, used at there prop doing the usual homeowner things, anyway, a good model ? never had a hydro tractor, any advice on this model ?

anyone have a b 20, are they a good machine ?,I'm looking at a 95 model with 3 pt. and backhoe,i sold my l235 dt , i'm hoping the smaller b20 will be a good machine ? thanks for any input, Todd S.

still available ?, and were are you located ? thanks todd s.

anyone have a parts diagram for this model backhoe ?

anyone have a backhoe 4590 parts diagram ?, anyone post one on here before ? i ordered a pin thru the dealer and just found out its the wrong one wanted to look up the proper no. for it.