Recent content by sardiscitydad

Thanks Vigo for the input . You and wolf man are both suggesting to check the same things and I really appreciate the info

Thanks brother I will do that in a few days . any idea how much suction is normal ? redneck test..finger on the end of the line at the 1st junction under the tractor I can feel just a little. I will order the seals for the pump and go ahead and rebuild it , change the rubber lines and clamps and...

Ok an update that really confuses me. i went back and drained the whole system to see if somehow something was in the screens, nothing as they were clean. I put a new filter on, filled it back up with fluid and started the machine. I lifted the 3point and she started whining just like they all...

I’ll check it out tomorrow after work. I do remember having the seal in the pump go out just as the rear movement was lost and it was low when I got back out of the pasture. I replaced the seal today, started her up and for 30 seconds everything was normal 🤣

Serviced everything 6 months ago so basically 1 month running time since the service as she sat for 5 months. Anything is possible so I will pull the screens tomorrow and double check 👍

The PTO shifting works as designed. The high/low shift is a little tight at times coming to high but it has always been like that since bought in 91

Hi guys I’m not sure where to search for movement problems on a B7100 HST 4x4 . It started out with a jerky movement then there was almost no reverse but it still moved forward long enough to come out of the pasture. This was 5 months ago and it’s sat until today. I cranked her up and she moved...

I’m wondering about an engine change on my B7100 HST. The D750 went down and I’m wondering if a D1100 would work with an adapter on the bell housing?

Thanks Wolfman. It was a retaining clip that had come out.

Hi guys,new here but I was using my B7100 Hst today bush hogging and it has got hung in reverse. It had a little forward right after it happened but now only reverse. it"s like it somehow flipped inside and now she will fly going backwards. Any ideas? :confused: