Recent content by RUBYRUSS

i have similar issue, if i rock my pedal back and forth it usually will start, now i have to tap/kick the pedal with my heel side to side. today i tried to take the cover off, i undid 5, 12mm bolts and the cover didn't move. how do you take the covers off. Also ive read about adjusting this...

I had cleaned the relief valve but evidently I didn't go far enough. I split the valve off the housing first and thats all I did to clean, that made no difference. I then split the adjusting housing where the springs are and that appears to have been my problem, lost of debris in there...

Mystery solved, evidently when I changed the fuel filter, I left the bleed valve open from trying to bleed earlier and it pushed air back to the hose before the filter, once that hose going into the filter was taken off and started to flow fuel, it was reconnected to the filter and the world was...

what solenoid are you referring to

mine did not have shutoff, I did the bolt in the end of the hose trick

with everything I have done to try and get this tractor started, new fuel filter make sure the tank is chock full and based on how easy this should bleed itself maybe im barking up the wrong tree. on a gas engine you can check for spark, if this was a gas id say no spark. although once in a...

on a bh77 backhoe, where are the pressure valves. my main boom arbitrarily drops thank you

I must having a senior moment, thats the oil Phil cap. I stopped at a Kubota dealer and he said never should have to crack the lines, just use the jet start valve and be patient and because of the incline make sure the tank is as full as possible. I know better than run it dry. Thanks for all...

I was power washing my l3200, I was low on fuel but I guess I did not realize how low and I was on an incline front up back side down. I didn't hear tractor sputter over the noise of the power washer, when im done washing I realize tractor is not running. I initially thought I did something...

i want to buy a repair manual for my b77 backhoe, any idea where, i see some on ebay that look legit thanks

kubota dealer said to check the pressure relief valve, any schematics or manuals i can buy thanks kevin

when im digging ill scoop/curl the bucket, then pull it in then raise the main boom before rotating, sometimes the main boom will drop, or lift a little then drop before coming out of hole. its always drifted a little, but now sometimes it hesitates before coming up and when up it will drop...