Recent content by Jdboone

Well now it appears I'm leaking gear oil from the main gear case/transmission into the clutch housing then thru the weep hole. Maybe input shaft seal? I was hoping prior that my leaking hydraulic fluid into the gear case was the culprit but now after replacing the fluids back to normal levels...

Hello! So my l200 has been leaking hydraulic fluid past the hydraulic piston seal into the main gear case. Recently I was mowing when I noticed oil pouring from the clutch bell housing weep hole. I was hoping the gear case had just gotten too full from the leaking hydraulic cylinder and the...

Ahh bummer the piston assembly had been discontinued. I guess I'll be attempting to source the u ring.

I really appreciate your help with this. I've been trying to find a u ring like what's come off this piston online with little luck. Might be worth buying the piston assembly from Coleman $45 is probably worth it at this point to be confident I have the right seal when I put everything back...

04811-50600, 32200-37380, and K7561-54370

The o ring and backup o ring I ordered don't seem to fit the piston od correctly.

The reason it seems stock to me is it fits so nicely on the piston. Even if this was someone's "upgrade" the o ring and back up o ring don't seem to be the right size for the l200 unless I'm missing something. I can't seem to get 2 photos to upload so I'm going to post the rings on the piston...

The seal I'm holding was on the piston as you can see it has a smaller id to fit the piston, it is thicker and has a slot in it. Hopefully that males sense.

Hello! I was able to use a 5 year old post from orange tractor talks to locate the pesky hydraulic leak in my l200. My father in law and I have owned the tractor for a few years and use to mow, run a post hole digger, and disc a food plot. The 3pt hydraulic system has leaked/drifted down ever...