Recent content by jay87t

my Hydro is made by hydro gear. so I was able to just look up the parts from hydro gear and bought them on ebay. pump was 55 and so was the motor block. its amazing the markup kubota puts on the exact same part. colemans wants 130.00 for each.

yeah tried that, just being suborn wont pop up at all, oddest thing, no matter I cracked open the hydro gear with it on. doesn't have to come off, found the motor cylinder block has a piston bore very worn out lots of slop in the piston, already had a new motor/pump on order, its really not...

Im in the process of rebuilding my HST on my TG1860. Im having a Issue removing the fan/pully from the HST. I removed the nut and cant seem to pull up the pulley, its as if something is blocking it. I do have a bit of play in the pully I can pull it up slightly but it stops as if something is...

Hey guys, my TG1860 has a weak hydro. get weaker as it gets hotter, its also weak going up hills, its gets slower and slower! the tractor is in amazing condition cosmetically and the engine runs great. Im thinking about pulling the hydro unit and rebuilding it, I watched that fella on you...

Thanks for the replies, D2Cat, yes when I start mowing my septic hill, It starts happening. I get problems from then on. I look at the inline fuel filter, its white I can see the fuel, should It be constantly full? cause I see it at times 1/2 full while running.

Hey guys, this year I been having a issue with my TG1860G the 18hp kawasaki motor, after a while of cutting the engine seems to bog down like its starving for fuel. I changed the fuel filter with a new one, but I still get the same issue. It bogs down kind of like it wants to stall. If I...

that box blade is over priced, I just bought that exact same one for 800 brandnew after tax. at ben berg in wainfleet.

I added one to my B6000, bought the gauge and fuel sensor from alibabba express. cost me about 20.00, had to drill a hole in top of the gas tank though and mount the sensor. works good when stopped, when driving the needle bounces quite a bit.

did it bolt right up? what kind of mods did you have to do? I would love to see pics. Jay

Here in Canada, Ontario, I find I can get almost any part for my B6000. I would just make a list and present it to the part counter. there is no "rebuild kit" for that engine. I changed my piston rings on my B6000 not long ago. I will be pulling the engine again soon because I still have...

you can get something like this and mount it on the side below the hood or something.

Hi guys, I had to replace a hose on my front loader on my B6000, its a homemade loader but its constructed very well. I bought the unit with the loader on it. my question is, the hose I replaced was a hydraulic cylinder hose and it is ,3/8 comes from a metal line to the hose then cylinder ...

oh you know , you might be right. so they both hook up to the throttle linkage inside the cover. but the flimsy ones goes to the actual cover.

oh sorry, its a B6000. its a very thin flimsy spring.

Hey guys I just finished my cam plug repair, I was missing the back cam, fell out. got everything back in and I'm now putting the front cover back on. my problem is, there are 2 springs that hook up at the throttle section. one is to the throttle lever (heavy duty spring) and there is another...