Recent content by alleyyooper

Just wait for a stickler to come along and weld up a hub for it to fit the Bark buster. Might be the cone of death on a tractor PTO or the hub of a truck but a Bark Buster, only a real dumb idiot could get hurt on one. :D Al

OH it is going to get sold. Probably be many years when the depreation has melted down. Since many of you have never read the full first post. You have no Idea of the problem. The tractor was working fine for what it is except that dash warning light when parked for the 50 hopurs service. Even...

1965 Ford 5000 gas. http://i3.photobucket.com/albums/y60/twotracker/My%20big%20tractors/5000croppedrightside_zpsaa6990fb.jpg 1961 Allis D17 gas, cheap Kelly loader. http://img.photobucket.com/albums/v295/oldgrumpy/my%20tractors/Allisbuildingthebeegarden.jpg 1957 Massey 555 diesel...

You guys are just to funny. I have tractors from 1938 to 1965 and not one have a park brake warning lite in the dash. any one with a bit of common sence should be able to tell the brake is locked. that switch is all I messed with just to see if the plunger was set up. The real issue is the...

The dash warning lite for the park brake stopped working at 28 hours. The tractor has nearly 57 hours on it now and is why I was under it to grease those fittings. So to get the brake working again I need to load the tractor on a trailer and drag it 35 (aprox) miles to the dealer and wait god...

The park brake warning lite on the dash stopped working at about 28 hours. I have to crawl under it to grease the brake shaft so I am looking at the switch. Made no adjustments to any thing just cleaned a little mud from the switch and pushd it in and let it out a few times. then it sat for...

spo means fat fingers struck again, should have read SO. :D Al

Also going to spend the big bucks and buy a grease gun lock on coupler and maybe even a air powered grease gun. I don't think the front bevel gears take grease from a gun as there is no zerks there just a plug spo thinking gear lube there. gona call the dealer on that one. By the size I would...

OH well guess will have to find a different way like go to the library to use a puter or find a friend still running the highly crapped out windows program. I don't think I have any of those. I have the easy out already. :D Al

This is what I get when I go to those links. Support for the Safari browser coming soon. But thanks just the same. :D Al

parts illustration at Kubota? Where is that? :D Al

I bought the Land Pride QH a few weeks ago. It is working great so far. It was over $300.00 but the steel you can see is thicker than the habor freight model. I was all set to buy the HF QH till I saw a You tube of a fellow who got stuck in the mud with one and the lower arms bent WAY OUT OF...

Go the tractor all greased for the 50 hour service excep one tie rod inside fitting the nipple broke off right at the threads. So is that grease zerk a standard or do I need to go buy a metric zerk instead of a SAE zero. :D. AL

Just about any Chrysler Dodge dealer in SE Michigan will do the Cummins for about $50.00. The high priced service tec's don't do it they use the low paid service in training porter people. Same with the gas engine changes, and if you watch dealers will run specials, just be prepared for you need...

Just finished a search and it appears every one here except one person used genuine Bota oil in the engine and nobody uses a fleet guard or other filter. Some of the prices paid to the dealer for service I sure can't hardly believe. five quarts of oil and filter and the charge is over $100.00...