The bx 2200 and bx series tractors tend to run hot and are very sensitive to lack of air flow through the radiator. i have made one major change on my Kubota bx 2200 a after mart radiator for a Honda auto it has three rows of tubes and aluminum tanks top and bottom of the radiator. Rework of the an shroud is required I have a press brake for re bending of the shroud a big job. A new 5 blade fan is next. Please let me know if you have made any other improvements to the cooling system
Orange crusher, I'm new to the forum. I have a 2018 BX2680 w/ 322 hrs and the quick coupler with the lever assembly has a leak on the white line side. I want to do the same mod that you and john T did. I saw his parts list of 4 sets of pioneer couplers, 4 3/8" JIC to 1/4" NPT adapters and the tube clamps. When he said 4 sets that is the males and female correct? When did you get your coupler covers and are you happy with them? Thanks, Steve
I'm bought a b7200 three years ago, and I'm on my third glow-plug controller. They burn out and have to be replaced. Plugs won't glow without them which makes starting tough. Is this normal, or is my sketchy wiring causing a problem. Last night, when I first installed a fresh one, there was a little smoke (like it was going to burn out too) before it started to function normally. Any thoughts for a newbie are appreciated.
Hi there, we are new to this forum, so hello all. We have a B1550 - manual gear box, today we have changed the transmission oil but now need to find the transmission strainer to clean that - but we don't know where it is - can anyone tell us where to find the strainer please??
I saw in one of your posts that you managed to get your hands on a manual for the KMS180. I've just managed to get my hands on one of the backhoes here in central portugal. The machine has definitely had some use over the years, and there's a few bits that need some tlc. It would be infinitely useful to have a copy of the manual, so that I can go into a tractor shop and point at the things we need to replace (my portuguese really isn't that good!). Would there be any chance of you being able to scan me a copy? I'd be happy to send some money your way for your time....
I have a L4240 HST with LA854 loader. Kubota put 10x16.5 NHS tires on front, but with this big loader, the 10" wide tires are just plain wimpy. I want to put 12x16.5 NHS tires on the front but that increases the diameter from ~31" to ~33". Is there a way other than switching the front axel hydraulics to synchronize the larger tires with the rear tires when in 4wd?
I have a BX 2380.. When I bought a new oil filter to change oil, they gave me a smaller size filter than what was on the tractor (I bought new so no one put a different one on). So I went to an on line service and ordered another oil filter thinking the 1st place just gave me the wrong one. The 2nd place gave me the same exact one. Why is the replacement smaller than the original. I'll need 2 different oil filter wrenches. One to remove the first time, and a smaller one when I change oil again. Any thoughts??