Yikes!! Now that would really suck and make for a bad day!!I was going to post some pictures but my phone fell out of my pocket and the grinder ate it
Dan
Last edited:
Woodland Mills WG24 Stump Grinder
- Thread starter NCL4701
- Start date
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
It was actually a blessing in disguise. It was an old phone that I had been thinking about replacing. It was backed up so the only thing lost was a couple before pictures of the stump and a couple hundred bucks. Being phoneless for 36 hours was more uncomfortable than I would like to admit....
Dan
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Here is an after picture taken with the new phone. There used to be a 2-1/2 foot stumpthere.
Dan
Hmmm. Gets rid of the old stump and leaves you with two nice looking pups!
That's some grinder!
That's some grinder!
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
The blonde pup is only a year and a half old and likes to eat charcoal and chew on the charred ends of sticks from the burn piles. I suspect she is going to be a single malt Scotch abuser when she gets older....Hmmm. Gets rid of the old stump and leaves you with two nice looking pups!
That's some grinder!
Dan
You still have a stump there, it is just a bit further down into the ground. I had some stumps ground about 15 years ago, and now they are starting to rot and the ground is settling where they were. Still a lot easier than trying to dig them out.
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Nope. That particular stump is gone. It was ground out in stages reducing grade and widening the circle to get the rootball as I went. Grade in that area is almost two feet lower than when I started. Took over an hour.
Dan
Dave Ogren
Member
Equipment
BX23S w/FEL &BH &60" Mowing Deck, 48" Dirty Dog Box Blade, 48" Tar River Tiller,
So sorry about the phone.There are a couple YouTube videos of the grinder on a BX. It seems to work fine on the stumps they tackled. I just tackled a much larger one Friday - maybe 30" across at the cut and easily 6' root circle. The main portionwent easy but the root system really worked the L3901 over. I was going to post some pictures but my phone fell out of my pocket and the grinder ate it
Dan