J Jeffdirt New member Equipment Bx7800 Sep 5, 2020 1 0 1 Tn Sep 5, 2020 #1 Hello, I am assuming this is rather uncommon. Just too much wear and tear or did something freeze up? Attachments B1459425-2574-4589-A134-84A58E50BBC6.jpeg 43.5 KB Views: 201
Hello, I am assuming this is rather uncommon. Just too much wear and tear or did something freeze up?
BruceP Well-known member Equipment G5200H Aug 7, 2016 835 353 63 Richmond, Vermont, USA Sep 6, 2020 #2 You are correct this is uncommon. It may have been a casting flaw/crack from the factory which eventually migrated into a critical area. (a crack almost always migrates over time/use/loading)
You are correct this is uncommon. It may have been a casting flaw/crack from the factory which eventually migrated into a critical area. (a crack almost always migrates over time/use/loading)
2 200mph Well-known member Equipment L4740-3 Cab, FEL, Fnt Snow Blower L2185, LP Finish Mower, LP Rotary Mower Mar 3, 2017 1,228 58 48 PA Sep 6, 2020 #3 Had one break on the B3030. Original actually looked like it was made from two pieces and welded together. The new part was a single piece in this particular case.
Had one break on the B3030. Original actually looked like it was made from two pieces and welded together. The new part was a single piece in this particular case.