What Model Tractors Use Metric 6-hole 170mm(6.69") b.c. Wheels ?

[ponyakr]

Need to know what tractors use this particular metric 6-hole wheel pattern.

It's listed as 170mm, 6.69", & 6 11/16". The center hole is listed as 5.32".

Assume that several brands, which were made in South Korea and/or India MIGHT use 'em, on some models.

 

[Henro]

Need to know what tractors use this particular metric 6-hole wheel pattern.

It's listed as 170mm, 6.69", & 6 11/16". The center hole is listed as 5.32".

Assume that several brands, which were made in South Korea and/or India MIGHT use 'em, on some models.

check the thread titled “Tractor Wheel Database Somewhere?”

eserv posted some great information that may help you.

looks like the smaller L series tractors may use the wheel you are asking about.

 

[Henro]

Here is a link to that thread(I hope it works):

https://www.orangetractortalks.com/forums/threads/tractor-wheel-database-somewhere.48118/

 

[ponyakr]

Here is a link to that thread(I hope it works):

https://www.orangetractortalks.com/forums/threads/tractor-wheel-database-somewhere.48118/

THANKS ! Looks like there were lots of L series tractors that used the same bolt pattern & center hole size. Should be able to find a cheap, but decent used one, I hope.

Tractor Wheel Database Somewhere?

I would like to know the specifics of the rear wheels on my B2910. Of course I could measure and hopefully accurately determine the wheel lug bolt (and stud) hole circle diameter and the wheel pilot size. But I think to get an accurate measurement I would have to remove a loaded tire. I would...

www.orangetractortalks.com

May still have to make an emergency spare. Still have lots of 10-hole truck wheels/tires.