Universal snow plow?

cric8192

New member

Equipment
B1500
Aug 10, 2021
1
0
1
Canada
Hello,

I have a grey market B1500 from Japan without a loader. I primarily use this tractor to cut grass but would like to use it for snow removal as well.

Is there a decent snow plow that can hook to this tractor? I am fairly handy with fabrication if need be. The tractor has 1 set of remotes that could be used for lift/lower.
Thanks
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
12,901
4,268
113
40 miles south of Kansas City
I'd look for a 6' plow off of a Jeep or if that's too long find something 5' and start fabing. Don't think you'll find anything factory. Just use your imagination!

Years back I fabricated a plow on a Ferguson 20. All made up in my mind with a 3" channel going under to be the main support pushing on the rear frame. Used the same method to life as the mower deck used. (I put a belly mower on it) When I went to sell it I was going to keep the plow but the guy was so intrigued by the setup he kept raising his offer. Finally I gave in! Got enough money to pay for 1/2 of a new B8200 !

You can do it. Just sketch it out and start scrounging material, by winter you'll have a prize!
 
  • Like
Reactions: 1 user

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
9,676
3,927
113
Greensville,Ontario,Canada
curious was I , according to TD , it's an 18hp 'garden tractor'., so NO way a 5' let alone 6' JEEP plow will work !
Consider a 42-46" 'lawn tractor' snow plow setup,something for say Cub Cadet, MTD, etc. usually get them for 2-400$. Maybe even buy a 'complete rig' (busted engine ?) and go from there.