Looking for the correct tie rod for the drag link on my L345. I know I will need to cut the old ones off and reweld the new ones on.
Tie Rod replacment for L345
- Thread starter kjrobinson
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
On that model it takes standard tie rod ends, take them off and take them to NAPA or any other good auto parts store to cross them over.
For the drag link ends do the same thing, don't cut them off till you get matches.
I've also had good luck finding generic ones that fit on eBay.
For the drag link ends do the same thing, don't cut them off till you get matches.
I've also had good luck finding generic ones that fit on eBay.