Can anyone post some pics of how their hydraulics are run from b2650 to 0660 grapple? I am new here so hopefully someone can help. my dealer ran mine quite strange. The lines are rather long and also zip tied to another line. therefore; when I want to detach grapple and add FEL for instance, I always have to cut the zip tie and then add another when I put it back on. Kinda defeats the purpose of having a quick attach. Any pics would be helpful. I can send pics of my setup when next time I get a chance.
sgc 0660 landpride grapple
- Thread starter leorange0000
- Start date
That sounds odd. Can you post a photo of your setup? There should be quick disconnects for the hoses at the cross tube on your loader frame. You should be able to plug and unplug your grapple hoses there. The rest of the third function hoses should run up the loader arm and have a second set of quick disconnects at the loader valve so that you can completely remove the loader.
Having a hard time on my phone trying to post a picture. Thx for the reply. I will send picture from my work computer on Monday.
Attachments
Those don’t look like the hoses that landpride sells with their grapple. They look like hoses that the dealer had made and they made too long. If it were me I would cycle your loader curl function and find out how long your hoses should comfortably be and then have them cut and new ends crimped on. It’s your best long term solution. Once your done you’d be smart to protect all the hoses, especially the ones that run through the grapple with spiral hose wrap to protect from abrasions. Later I’ll try and upload a pic of my sgc0660 grapple and how my hoses are done.
OK, when you can send me a pic. I am also wondering why the couplings on the grapple itself are off centered. I think it would have been better in the center