Need help!

4745A&S

New member

Equipment
B2400HBD
Oct 9, 2021
2
0
1
Southeast Missouri
Hello all! New poster here with a bit of an issue… we just got a B2400 project, bought it from a guy who had pulled the engine apart years ago. We’ve got the engine (mostly) back together, waiting on our local dealer to come up with some parts. Where we’re snagged is figuring out how everything else goes back together. Looking for someone who has a B2400HDB that would be willing to snap some pictures of a whole tractor for us.
Thanks for your time!
 

85Hokie

Well-known member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
9,015
1,070
113
Bedford - VA
Welcome to the forum btw,

Can you be MORE specific as to what parts you are trying to place back?

Bolts? Gaskets?

Pictures will help too (will need to post a few more times to be able to post pictures)
 

4745A&S

New member

Equipment
B2400HBD
Oct 9, 2021
2
0
1
Southeast Missouri
Welcome to the forum btw,

Can you be MORE specific as to what parts you are trying to place back?

Bolts? Gaskets?

Pictures will help too (will need to post a few more times to be able to post pictures)
Bolts and gaskets we got, I think. It’s more cable routing, linkages and bracketry. We’ll post pics as soon as we can.
 

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex.
May 24, 2019
3,385
1,204
113
North of Pittsburgh PA
Was the injector pump off the engine?

If so from what I have read here at OTT it is VERY IMPORTANT to have the correct shim under it when you put it back on...