Anyone know if the 72” middle mower deck is supposed to come with the clevis pins to hold the lift arms up and also the pins to keep the mowing deck up?
Are they stored somewhere on the tractor? The manual shows them as existing but unclear if I’m supposed to have to source my own washers, clevis pins, and snap rings.
This is needed so that the linkage arms and/or mower deck do not lower when using a 3 point hitch implement.
Photos below of tractor and manual pages describing this.
Are they stored somewhere on the tractor? The manual shows them as existing but unclear if I’m supposed to have to source my own washers, clevis pins, and snap rings.
This is needed so that the linkage arms and/or mower deck do not lower when using a 3 point hitch implement.
Photos below of tractor and manual pages describing this.
