CODE CLEARING INSTRUCTIONS - LX3310
5.1.3 Clearing error information (mode b)
(LX3310)
In this mode, displayed error information on the meter
panel can be cleared.
NOTE
• Be sure to clear error information by performing
this procedure after servicing.
1. While holding down both DPF inhibit switch (2) and
parked regeneration switch (1), turn main switch to
“ON” or “START” position.
Mode selection display is indicated on the LCD (3).
2. Press the parked regeneration switch (1), which will
change the mode indicated on LCD.
3. If is indicated on LCD, press the parked
regeneration switch (1) for more than 2 seconds.
Error information clear mode is selected and the
expression [PUSH] is displayed (A).
4. Press the parked regeneration switch (1) for more
than 2 seconds.
The expression [OFF] is displayed.
5. Turn “OFF” the main switch.
6. If clearing fails, repeat from step 1.