I am looking for a picture of the factory third function joystick for a B2650.
The one that came with the kit I installed is kind of cheap feeling.
The one that came with the kit I installed is kind of cheap feeling.
Looking for a picture?
- Thread starter Jsjac
- Start date
The kit that I got was the WR Long.
It was recommended by the Kubota dealer that we buy from.
This should be a picture of the joystick top with the switch.
www.wrlonginc.com
It was recommended by the Kubota dealer that we buy from.
This should be a picture of the joystick top with the switch.
2 - Handle for 3rd Function Valve Kits (Product #: VALHandlenw) | WR Long
Began use Feburary 2020.
www.wrlonginc.com
TheOldHokie
Well-known member
Lifetime Member
Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
On the open station machines these are all mostly third party after thoughts. IMO that is actually one of the better ones.The kit that I got was the WR Long.
It was recommended by the Kubota dealer that we buy from.
This should be a picture of the joystick top with the switch.
2 - Handle for 3rd Function Valve Kits (Product #: VALHandlenw) | WR Long
Began use Feburary 2020.
Some of the bigger and more expensive cab models have it integrated in to the factory joystick.
Dan