I’m servicing the hydraulic system on this tractor and got all new parts for the canister filter including the outer case. There is an o-ring (60) below the magnet (40) and above the grommet (70) in the top of the stainless mesh filter element (50)
The issue is the o-ring (60) is smaller than the hole in the element grommet as well as smaller than the magnet. I double checked the part number and dimensions and am not seeing how it fits anything. Anyone done this before?
The issue is the o-ring (60) is smaller than the hole in the element grommet as well as smaller than the magnet. I double checked the part number and dimensions and am not seeing how it fits anything. Anyone done this before?